Instructions for cutting Vanity Tops

To cut Faucet holes through our vanity tops: Tools Required: Spade bit size required per Faucet instructions.

To cut Sink holes through our vanity tops: Once determined where to cut per your specific needs
1. Apply tape in area that the jigsaw will come into contact with the surface. This will prevent scratching the finish or liquid glass surface. (We recommend 2" wide 3M Blue masking tape)
2. Draw cut line on tape
3. Drill Start hole inside the line
4. Use Metal cutting blade in jig saw
5. Remove tape carefully

Instructions for cutting Liquid Glassed Vanity Tops

To cut Faucet holes through Liquid Glass: Tools Required: Spade bit size required per Faucet instructions.

To cut Sink holes through Liquid Glass: Once determined where to cut per your specific needs
1. Apply tape in area that the jigsaw will come into contact with the surface. This will prevent scratching the finish or liquid glass surface. (We recommend 2" wide 3M Blue masking tape)
2. Draw cut line on tape.
3. Drill Start hole inside the line.
4. Use Metal cutting blade in jig saw, cut slowly. It helps to have someone support the piece being cut out so it does not drop.
5. Remove tape carefully